
What goes into tile shower installation
A tile shower is a waterproof box with tile on the face of it. We build that box with a full waterproofing membrane on the walls and the pan, flood-test the pan, and only then start setting tile.
The floor gets sloped to the drain so water leaves the shower instead of sitting in the grout. Linear drains, curbless entries and pebble floors each need their own slope and detailing, and we decide on those during rough-in.
The floor gets sloped to the drain so water leaves the shower instead of sitting in the grout.
Layout is drawn before the first cut: where the grout lines meet the niche, where the full tiles land, how the pattern turns the corners. That is the part you look at every morning.
Glass, valve placement and niche location are decided before the walls are closed. The valve gets set at the right depth for the tile thickness, shower heads and handhelds go where the people using the shower can reach them, and the niche lands between studs where it does not interrupt the tile layout.
Outdoor projects often start with a simple wish to use the yard more. That can mean a patio, a covered deck, a pavilion or a full outdoor kitchen. The useful question is how you want to spend an evening out there, because that decides the shape of the space.
Some decisions are easy to change later and some are not. Paint colors, light fixtures and hardware can be swapped. Window locations, roof lines, drain positions and foundation size cannot. We spend the most time on the second list.
Composite decking holds up well in this climate, but the framing under it is still wood. Joist spacing, ledger flashing and footings below frost are what decide whether a composite deck lasts as long as the boards on top of it.
If that sounds like the way you would want the work done, the next step is a conversation and a walkthrough. We will look at what is there, talk through what you are trying to get to, and tell you honestly whether we are the right company for it.
There is no cost to that conversation and no obligation after it. We would rather spend an hour finding out a project is not a fit than take it on and do a mediocre job.
How this job runs
Walkthrough
We look at the property and the existing conditions before anything else.
Drawings
Plans and a written scope, so everyone is building the same thing.
Build
Our crew runs the work, with Samuel on site through it.
Walk it together
We close the job by walking it with you, not by sending a final bill.
What actually decides the outcome
Finish work is what people actually touch and look at every day, and it is where the difference between a good contractor and an average one is most visible.
Tile is a good example. Whether a tiled shower lasts is decided entirely by the waterproofing and substrate preparation underneath, which nobody ever sees. The layout, the cuts and where the lines land are what people do see. Both have to be right.
Stone veneer has to sit over a drainage plane and lath, detailed so water that gets behind it has a path back out. Installed as a surface treatment stuck to sheathing, it holds moisture against the framing and causes the problem it was supposed to prevent.
Exterior paint is mostly preparation. Washing, scraping, priming bare wood and caulking the joints is the majority of the labor and all of the longevity. The finish coat is the easy part and the part everyone focuses on.
Work like this



Truth, trust and transparency. That is the standard, and it shows up in the schedule.Samuel Hand
Related work

Custom Tile Bathrooms
Bathrooms tiled floor to ceiling
Fully tiled bathrooms where the floor, the walls and the shower are laid out as one surface.
Read more
Bathroom Remodeling
Bathrooms that hold up to daily use
Waterproofing done right under the tile, because that is the part nobody sees and everybody regrets.
Read more
Custom Tile Installation
Tile set on prepared substrate
Large format, mosaic and stone set over proper waterproofing and a flat substrate.
Read moreWhat we put in writing
Two numbers we will put in writing: standing seam metal roofing carries a forty-year warranty and dimensional shingles carry thirty. Both depend on installation to specification, which is why detail matters as much as product.
We back our labor as well as the products. Work that is not right gets made right, and the reason we can promise that is that we take on what we can actually do well.
We back our labor as well as the products.
Six counties, seventy miles, one shop in Gratis. Montgomery, Greene, Warren, Butler, Preble and Miami is the whole of our service area and we would rather cover it well than stretch it.
Practically that covers Dayton, Kettering, Centerville, Beavercreek, Springboro, Lebanon, Mason, Hamilton, Fairfield, West Chester, Troy, Piqua, Eaton and the towns between them. Near the edge of that, call and ask.
Tile Shower Installation questions
Do you test the shower pan?
Yes. The pan is flood-tested before tile goes down, so a leak is found while it is still easy to fix.
Can you build a curbless shower?
Yes. A curbless shower needs the floor recessed and sloped during framing, so it has to be planned early.
What tile works best in a shower?
Porcelain and natural stone both work when installed correctly. Stone needs sealing, and smaller tiles on the floor give better grip and slope.
How long does a custom home take?
From first drawings to move-in, most custom builds run twelve to eighteen months depending on size, site conditions and how quickly selections get made. We give you a real schedule once the plans are final.
Do you work with architects, or do we need our own?
Either way works. We work with licensed architects regularly and can bring one in, or we can build from plans you already have.
What area do you cover?
We work a seventy-mile radius from Gratis, Ohio, which covers Montgomery, Greene, Warren, Butler, Preble and Miami counties.
Are you licensed and insured?
Yes. We carry the coverage required for residential construction in Ohio and can provide certificates before work begins.
What warranty comes with a standing seam metal roof?
The standing seam metal we install carries a forty-year warranty. Dimensional shingles carry a thirty-year warranty.
Who is actually on site during my build?
Our own crew handles the core work. Samuel is on site through the build, not just at the start and the end.
How do you handle changes once we have started?
Changes get written down, priced and approved before they happen. Nothing gets built off a hallway conversation.
Ready to talk about your project?
We build across Montgomery, Greene, Warren, Butler, Preble and Miami counties.