Building your dream into reality.
Hand Made EnterprisesWhat goes into dimensional shingle roofing
Dimensional shingles are the shingle we install when a client prefers shingles to metal. They are thicker than three-tab, they hold up better in wind, and the shadow lines give the roof some depth. They carry a thirty-year warranty.
That warranty depends on the shingles going down to the manufacturer’s specification, which is where most shingle roofs fall short. Nailing pattern, starter course, underlayment and ventilation all have to be right.
That warranty depends on the shingles going down to the manufacturer’s specification, which is where most shingle roofs fall short.
We install ice and water shield at the eaves and in the valleys, new flashing at every wall and chimney, and check the attic ventilation, because a roof that cooks from below wears out years early.
On a replacement we tear off to the deck, replace any soft or damaged sheathing, and then install new drip edge before the underlayment goes on. Pipe boots, vents and step flashing get replaced, not reused, because those small parts are where an otherwise good roof starts to leak.
Outdoor projects often start with a simple wish to use the yard more. That can mean a patio, a covered deck, a pavilion or a full outdoor kitchen. The useful question is how you want to spend an evening out there, because that decides the shape of the space.
Not every project needs an architect, but many benefit from one. Additions, new homes and major layout changes usually do. Smaller remodels can often be drawn by us. We will suggest the right level of design for the job instead of adding cost that does not help.
Tile is only as good as what is under it. A flat, stiff floor and a proper waterproofing system in wet areas matter more than the tile itself. That is especially true for large format tile, which shows every high and low spot.
If that sounds like the way you would want the work done, the next step is a conversation and a walkthrough. We will look at what is there, talk through what you are trying to get to, and tell you honestly whether we are the right company for it.
There is no cost to that conversation and no obligation after it. We would rather spend an hour finding out a project is not a fit than take it on and do a mediocre job.
How this job runs
Walkthrough
We look at the property and the existing conditions before anything else.
Drawings
Plans and a written scope, so everyone is building the same thing.
Build
Our crew runs the work, with Samuel on site through it.
Walk it together
We close the job by walking it with you, not by sending a final bill.
What actually decides the outcome
A roof is a water management system, not a covering. Every penetration, valley and transition is a place water can get in, and each one has a correct detail. We install to those details rather than to whatever is fastest.
Standing seam metal is what we recommend on most custom work. The fasteners are concealed under the seam instead of punched through the panel, which removes the failure point that shortens the life of an exposed-fastener roof. The metal we install carries a forty-year warranty.
Standing seam metal is what we recommend on most custom work.
On a replacement, the tear-off matters as much as the new material. Once the old roof is off we can see the decking, and decking is where hidden damage lives. We repair what we find before anything new goes down, and we tell you what we found.
Where a client prefers shingles, we install dimensional shingles carrying a thirty-year warranty, with the same attention to underlayment, ice and water shield at the eaves, and flashing at every wall and chimney.
Truth, trust and transparency. That is the standard, and it shows up in the schedule.Samuel Hand
Related work

Standing Seam Metal Roofing Replacement
Tear off, deck repair, new panels
Replacing a failed roof means opening the deck and fixing what the old roof hid.
Read moreMetal roofs with a 40-year warranty
Standing Seam Metal Roofing Installation
Standing seam panels with concealed fasteners, carrying a 40-year warranty.
Read more
Exterior Remodeling
New skin on a sound house
Siding, trim, windows and entries replaced as one job so the details line up.
Read moreWhat we put in writing
Forty years on the standing seam metal, thirty on the dimensional shingles. Manufacturer coverage like that is only as good as the installation under it.
The manufacturer covers the material; we cover the installation. Anything that is ours to fix, we fix.
The manufacturer covers the material; we cover the installation.
We work six counties in southwest Ohio: Montgomery, Greene, Warren, Butler, Preble and Miami. That is a seventy-mile radius from our shop in Gratis, and it is deliberately limited so we can actually service it.
Practically that covers Dayton, Kettering, Centerville, Beavercreek, Springboro, Lebanon, Mason, Hamilton, Fairfield, West Chester, Troy, Piqua, Eaton and the towns between them. Near the edge of that, call and ask.
Dimensional Shingle Roofing questions
How long do dimensional shingles last?
The dimensional shingles we install carry a thirty-year warranty when they are installed to the manufacturer's specification.
Should I choose shingles or standing seam metal?
Metal lasts longer and carries a forty-year warranty. Shingles cost less up front. We will walk through both for your house and budget.
Do you replace the flashing?
Yes. We install new drip edge, step flashing, pipe boots and vent flashing rather than reusing the old parts.
What warranty comes with a standing seam metal roof?
The standing seam metal we install carries a forty-year warranty. Dimensional shingles carry a thirty-year warranty.
Who is actually on site during my build?
Our own crew handles the core work. Samuel is on site through the build, not just at the start and the end.
How do you handle changes once we have started?
Changes get written down, priced and approved before they happen. Nothing gets built off a hallway conversation.
Can you remodel an older home, or only build new?
Both. A good share of our work is remodeling houses that were built well and are worth keeping.
Do you give a written scope before work starts?
Always. It states what is included, what is excluded, what we expect to find once things are opened up, and how a change gets priced and approved. A one-page quote is how disputes start.
Who pulls the permits?
We do, and we deal with inspection scheduling as part of the job. You are not calling a building department.
What happens if you find something unexpected?
We stop, document it, price the options and talk to you before proceeding. On older houses that is a normal part of the process, not an emergency.
Ready to talk about your project?
We build across Montgomery, Greene, Warren, Butler, Preble and Miami counties.